Toro Groundsmaster 3280-D Service Manual page 379

Assembling the Front Axle (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g225931
17. Assemble the lock pin. Drive the pin to the approximate center location of
the pinion mate shaft. Peen the metal of the case to lock the pin in place
(Figure 242).
g226482
18. Position the ring gear onto the differential case and thread new bolts into the
ring gear. Tighten the bolts, alternating back and forth across the gear to
allow the gear to be pulled evenly into place. Torque the bolts to 61 to 88
N·m (45 to 65 ft-lb) to secure assembly
Figure 242
Figure 243
(Figure
Page 8–37
243).
Drive Axles: Service and Repairs