Installing the Hydraulic Pump Driveshaft (continued)
Groundsmaster
®
3280-D/3320
05138SL Rev B
4. Slide the driveshaft end yoke on the pump input shaft so that the yoke is flush
with end of the input shaft. Secure the driveshaft end yoke to the pump input
shaft with the 2 bolts (item 11 in
5. Position the driveshaft loop to the radiator frame and secure with the 2 flat
washers and 2 locknuts.
6. Lubricate the grease fittings on the driveshaft.
Figure
85) and 2 locknuts.
Page 5–99
Hydraulic System: Service and Repairs