Toro Groundsmaster 3280-D Service Manual page 319

Removing the Wheel (continued)
Installing the Wheel
Groundsmaster ® 3280-D/3320
05138SL Rev B
4. Lift the machine with a jack until the wheel to be removed is off the ground.
Support the machine with appropriate jack stands.
5. Remove the 5 wheel-lug nuts that attach the wheel to the machine, and
remove the wheel.
1. Install the wheel to the machine with the 5 wheel-lug nuts.
2. Lower the machine to the ground.
Failure to maintain proper torque could result in failure or loss of
wheel and may result in personal injury.
Maintain the proper torque of the wheel-lug nuts.
3. Torque the front wheel-lug nuts evenly to 102 to 115 N∙m (75 to 85 ft-lb)
in a crossing pattern.
4. Torque the rear wheel-lug nuts evenly to 102 to 122 N∙m (75 to 90 ft-lb)
in a crossing pattern.
5. Check and adjust the tire pressures; refer to
WARNING
Page 7–5
Specifications (page 7–2).
Chassis: Service and Repairs