Oil Cooler (Groundsmaster 3280-D) - Toro Groundsmaster 3280-D Service Manual

Oil Cooler (Groundsmaster 3280-D)

g221637
1. Swell latch (2 each)
2. Flange nut (6 each)
3. Flange nut (4 each)
4. Radiator frame
5. Locknut (2 each)
6. Hydraulic tube (2 each) 18.
7. O-ring (2 each)
8. Straight hydraulic fitting
(2 each)
9. O-ring (2 each)
10. Oil cooler assembly
11. Carriage bolt (2 each)
12. Radiator
Removing the Oil Cooler
Hydraulic System: Service and Repairs
13. Radiator cap
14. Hose clamp (3 each)
15. Locknut (8 each)
16. Flat washer (10 each)
17. Foam strip (2 each)
Bolt (4 each)
19. Reservoir hose (2 each) 31.
20. Coolant reservoir
assembly
21. Fan shroud
22. Upper radiator hose
23. Lower radiator hose
24. Hose clamp (4 each)
The radiator and oil cooler must be removed from the machine as an assembly;
refer to Removing the Radiator (page
Figure 111
25. Flange-head screw
(4 each)
26. Pop rivet (4 each)
27. Back washer (2 each)
28. Bottom radiator shield
29. Bulkhead locknut
(2 each)
30. Pipe plug
Carriage bolt (4 each)
32. Retainer nut (2 each)
33. Driveshaft loop
34. Clamp
35. Hose clamp
36. Flat washer (6 each)
4–12).
Page 5–142
37. Lock washer (6 each)
38. Hex nut (6 each)
39. Vent hose
40. Vent tube
41. Adhesive clamp
42. Carriage screw (6 each)
43. Retaining ring (6 each)
44. Foam seal
45. Radiator screen
Groundsmaster ® 3280-D/3320
05138SL Rev B