Servicing The Rear Axle (2-Wheel Drive) - Toro Groundsmaster 3280-D Service Manual

Servicing the Rear Axle (2-Wheel Drive)

g223802
1. Rear axle
2. Flange-head screw
3. Spindle cap
4. Retaining ring
5. Thrust washer (0.060 inch thick) (2
each)
6. Flat washer (0.018 inch thick)
7. Flat washer (0.032 inch thick)
8. Spindle bushing (2 each)
Groundsmaster ® 3280-D/3320
05138SL Rev B
9. Grease fitting (4 each)
10. Thrust washer
11. Right spindle
12. Flat washer (2 each)
13. Jam nut (8 each)
14. Jam nut (left-hand thread) (2 each) 22.
15. Ball joint (left-hand thread) (2 each) 23.
16. Ball joint (2 each)
Note: For repair information regarding the rear axle on 4-wheel drive machines;
refer to Chapter 8: Drive Axles (page
Figure 182
17.
18.
19.
20.
21.
24.
8–1).
Page 7–13
Jam nut (2 each)
Tie rod (2 each)
Retaining ring
Thrust washer
Steering pivot bushing (2 each)
Steering pivot plate
Left spindle
Axle pivot bushing (2 each)
Chassis: Service and Repairs