Toro Groundsmaster 3280-D Service Manual page 369

Disassembling the Front Axle (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g225914
10. Remove the 8 side cover bolts, and remove the side cover from the carrier
assembly (Figure 223). Clean the gasket material from the mating surfaces
before assembly.
g226660
1. Bearing spacer
2. Outer bearing cup
3. Outer bearing cone
11. Install the differential gear holder to carrier to retain the spur gear; refer to the
Differential Gear Holder (page
and seal from the pinion shaft
Figure 223
Figure 224
4. Shim
5. Seal
6. Flange coupler
8–5). Remove the nut, washer, flange coupler,
(Figure 224).
Page 8–27
7. Washer
8. Nut
Drive Axles: Service and Repairs