Toro Groundsmaster 3280-D Service Manual page 371

Disassembling the Front Axle (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g225917
15. Clamp the inner pinion bearing with a universal bearing remover
227). Position the unit in a press and carefully push the drive pinion out of
the bearing.
Do not allow the pinion to drop on the floor during removal as
damage will result.
g225918
16. To remove the outer pinion bearing cup, position the housing in a press.
Place a press plate of the proper size against the cup. Press the cup out
of the housing (Figure
17. Position the front housing on a press bed with the bearing saddles resting
on the press bed. Protect the bearing saddles with a piece of wood if the
press bed is rough.
Figure 227
IMPORTANT
Figure 228
228).
Page 8–29
(Figure
Drive Axles: Service and Repairs