Toro Groundsmaster 3280-D Service Manual page 180

Assembling the Hydrostatic Transmission Neutral Arm Assembly
Hydraulic System: Service and Repairs
1. Assemble neutral arm components to hydrostatic transmission
If eccentric pin was removed, ensure that the mark on eccentric pin is
orientated to top of transmission. Note fastener torque specifications.
2. Lubricate grease fitting on eccentric pin; refer to the Traction Unit Operator's
Manual.
3. Check and adjust neutral position; refer to the Traction Unit Operator's
Manual.
4. Check for correct operation of neutral switch and adjust if necessary; refer to
Adjusting the Traction Neutral Switch (page
Page 5–96
(Figure
6–45).
Groundsmaster ®
05138SL Rev B
83).
3280-D/3320