Installing the Lift Arms
Chassis: Service and Repairs
1. If the lift arm was disassembled, install the lift arm components
2. Install the lift arm components to the machine
A. If the roll pins (items 6 and 7 in
pin, install the roll pins so that one end is flush with the pivot pin and the
inner roll pin split should be opposite to the outer roll pin split
3. Connect the brake return spring to the lift arm.
4. Mount the cutting deck to the lift arm; refer to the Cutting Unit Operator's
Manual.
5. Refer to the Cutting Unit Operator's Manual for lift arm adjustment
procedures.
Figure
190) were removed from the pivot
Page 7–28
(Figure
(Figure
190).
(Figure
Groundsmaster
®
3280-D/3320
05138SL Rev B
191).
192).