Toro Groundsmaster 3280-D Service Manual page 465

Assembling the Windshield Wiper Assembly
Groundsmaster ® 3280-D/3320
05138SL Rev B
1. If necessary, install the wiper motor components that were removed
316) and do the following:
A. If the wiper bracket (item 4 in
RTV sealant around the wiper opening on inside of the headliner before
you install the bracket.
B. Ensure that the wiper motor electrical connector is secured to the cab
wire harness.
C. Secure the roof to the top of the cab; refer to
(page 11–4).
2. If the wiper arm was removed, do the following:
A. Clean the tapered wiper arm sockets and wiper motor shafts.
B. Slide the wiper arm sockets onto the wiper motor shafts and secure the
wiper arm sockets with the 2 flange nuts. Install the wiper arm caps over
the 2 flange nuts.
C. Connect the washer hose to the wiper assembly.
3. If the wiper blade was removed, secure the blade to the wiper arm with the 2
screws and 2 lock washers.
Figure 316) was removed, apply bead of
Page 11–15
(Figure
Installing the Roof Assembly
Operator Cab: Service and Repairs