Toro Groundsmaster 3280-D Service Manual page 424

Installing the PTO Driveshaft (continued)
PTO System: Service and Repairs
3. Secure the end yokes of the PTO driveshaft as follows:
A. Install a cotter pin (item 7 in
B. Install a roll pin (item 5 in
C. Install the 4 bolts in the driveshaft end yokes. Alternate direction that
the bolt is installed on each yoke.
D. Install and tighten the 4 locknuts to secure the end yokes to the gearbox
shaft and PTO shaft.
4. Lubricate the PTO driveshaft grease fittings; refer to the Traction Unit
Operator's Manual.
Figure 290) in the end yoke and PTO shaft.
Figure 290) in the end yoke and gearbox shaft.
Page 9–6 Groundsmaster ® 3280-D/3320
05138SL Rev B