Toro Groundsmaster 3280-D Service Manual page 168

Filtering the Closed-Loop Traction Circuit (Machine Serial Number
above 316000000) (continued)
Hydraulic System: Service and Repairs
11. Remove the high flow hydraulic filter and hydraulic hose kit from the machine.
Connect the hydraulic hose to the left pump fitting. Ensure that you properly
tighten the hoses; refer to
Face Seal Fitting) (page
12. Lower the machine to the ground.
13. Check the hydraulic-fluid level in the hydraulic reservoir (front axle) and add
correct quantity of fluid if necessary; refer to the Operator's Manual.
Installing the Hydraulic Hose and Tube (O-Ring
5–9).
Page 5–84 Groundsmaster ® 3280-D/3320
05138SL Rev B