Glow Plug Indicator Light
Testing the Indicator Lights
Electrical System: Testing the Electrical Components
The glow plug light on Groundsmaster 3280-D machines should come on when
the key switch is placed in the O
S
position. The light should stay lit for approximately 6 seconds while the
TART
key switch is left in the O
g226816
1.
Glow plug indicator
2.
High temperature warning 4.
1. Park the machine on a level surface, lower the cutting deck, set the parking
brake, and shut off the engine.
2. Apply 12 VDC to the terminals 1A and 2A
3. Ground the terminals 1B and 2B
4. Both indicator lights should illuminate.
position before placing the key switch in the
N
position.
N
Figure 131
3.
Warning light front
Engine oil pressure
(Figure
(Figure
131).
Page 6–30
5.
Charge indicator
6.
Warning light back
131).
Groundsmaster
®
3280-D/3320
05138SL Rev B