Toro Groundsmaster 3280-D Service Manual page 50

Removing the Engine
Gasoline Engine: Service and Repairs
1. Park machine on a level surface, lower cutting deck (or implement), shut off
the engine, and remove key from the key switch. Chock wheels to keep
the machine from moving.
2. Open hood; refer to the Traction Unit Operator's Manual.
3. Disconnect negative (-) and then positive (+) battery cables at the battery.
4. Remove battery from machine; refer to
g230309
1. Battery
2. Bolt (3 each)
5. Remove bolts and flange nuts that secure battery base to brackets. Remove
battery base from machine
Do not open radiator cap or drain coolant if the radiator or engine is
hot. Pressurized, hot coolant can escape and cause burns.
Ethylene-glycol antifreeze is poisonous. Dispose of coolant properly,
or store it in a properly labeled container away from children and
pets.
6. Drain coolant from radiator; refer to the Traction Unit Operator's Manual.
Servicing the Battery (page
Figure 16
3. Battery base
4. Flange nut (3 each)
(Figure 16).
CAUTION
Page 3–16
6–80).
5. Lock washer
6. Ground cable
Groundsmaster ® 3280-D/3320
05138SL Rev B