Clear Commands - Alcatel-Lucent 7750 Configuration Manual

Clear Commands

card
Syntax card slot-number soft
card slot-number soft [hard-reset-unsupported-mdas]
card slot-number fp [1..2] ingress mode {access|network} queue-group group-name instance
instance statistics
card slot-number [soft]
Context clear
Description This command re-initializes the card in the specified slot. A clear card command (without the soft keyword)
is referred to as a Hard Reset. A clear card x soft command (with the soft keyword) is referred to as a Soft
Reset.
Parameters slot-number — Clears information for the specified card slot.
SR-c12/4: no cards can be cleared in this chassis type
SR-7: 1 - 6
SR-12: 1 - 10
soft — Issues a soft reset of the I/O module (IOM).
lag
Syntax lag lag-id statistics
Context clear
Description This command clears statistics for the specified LAG ID.
Parameters lag-id — The LAG ID to clear statistics.
Values
statistics — Specifies to clear statistics for the specified LAG ID.
mda
Syntax mda mda-id [statistics]
Context clear
Description This command reinitializes the specified MDA in a particular slot.
Parameters mda-id — Clears the specified slot and MDA/CMA.
7750 SR Interface Configuration Guide
1 — 800 (7750 SR-a4/8: 1 — 200; 7750 SR-c12/4: 1 — 64)
Interface Configuration
Page 751