Vll Clear Commands - Alcatel-Lucent 7210 SAS M Service Manual

VLL Clear Commands

id
Syntax id service-id
Context clear>service
clear>service>statistics
This command clears commands for a specific service.
Description
service-id — The ID that uniquely identifies a service.
Parameters
spoke-sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
This command clears and resets the spoke SDP bindings for the service.
Description
sdp-id — The spoke SDP ID to be reset.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
ingress-vc-label — Specifies to clear the ingress VC label.
sap
Syntax sap sap-id {all | counters | stp}
Context clear>service>statistics
This command clears SAP statistics for a SAP.
Description
sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Parameters
all — Clears all SAP queue statistics and STP statistics.
counters — Clears all queue statistics associated with the SAP.
stp — Clears all STP statistics associated with the SAP.
7210 SAS M Services Guide
service-id: 1 — 214748364
Values
svc-name: A string up to 64 characters in length.
1 — 17407
Values
1 — 4294967295
Values
Command Descriptions on page 939 for command syntax.
VLL Clear Commands
Page 855