Configure Ip Address (Ipv6) Settings; Configure Dns Servers Settings; Configure Lan Options Settings - Polycom RealPresence Group 550 Administrator's Manual

Administrator's Guide for the Polycom RealPresence Group Series

Configure IP Address (IPv6) Settings

Configure the following IP Address (IPv6) settings on the LAN Properties screen.
Setting
Enable IPv6
Enable SLAAC
Link-Local
Site-Local
Global Address
Default Gateway

Configure DNS Servers Settings

Configure the following DNS Servers settings on the LAN Properties screen.
Setting
DNS Servers
(in the local interface:
DNS)
Server 1 Address
Server 2 Address
Server 3 Address
Server 4 Address
(read-only in the local
interface)

Configure LAN Options Settings

Configure the following LAN Options settings on the LAN Properties screen. In the web interface, these
settings are displayed within LAN Options, but in the local interface they are arranged differently.
Polycom, Inc.
Description
Enables the IPv6 network stack and makes the IPv6 settings available.
Specifies whether to use stateless address autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Using DHCP to get the IP address means that you need a DHCP server to get the
address from the network, but with SLAAC, existing routers help the system get the IP
address from the network.
Displays the IPv6 address used for local communication within a subnet.
This setting is configurable only when Enter IP Address Manually is selected.
Displays the IPv6 address used for communication within the site or organization.
This setting is configurable only when Enter IP Address Manually is selected.
Displays the IPv6 internet address.
This setting is configurable only when Enter IP Address Manually is selected.
Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
This setting is configurable only when Enter IP Address Manually is selected.
Description
Displays the DNS servers currently assigned to the system.
When the IPv4 or IPv6 address is obtained automatically, the DNS Server addresses are
also obtained automatically. In the web interface, you can specify IPv4 DNS server
addresses only when the IPv4 or IPv6 address is entered manually. In the local interface,
the four DNS server address fields are always editable.
In the web interface, if the system does not automatically obtain a DNS server address,
you can enter one here. Up to four DNS server addresses are allowed. If all four address
fields show addresses, you cannot add another.
Networks
33