Interface Support For An Acx5000 Router; Table 29: Rj-45 Management Port Connector Pinouts For An Acx5000 - Juniper ACX5048 Manual

Table 29: RJ-45 Management Port Connector Pinouts for an ACX5000 Router
Pin Signal
1 TRP1+
2 TRP1–
3 TRP2+
4 TRP3+
5 TRP3–
6 TRP2–
7 TRP4+
8 TRP4–
Related
Documentation

Interface Support for an ACX5000 Router

Copyright © 2015, Juniper Networks, Inc.
Table 29 on page 59 provides the pinout information of the RJ-45 management port
connector. An RJ-45 cable is supplied with an ACX5000 router.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
Management Port LEDs on an ACX5000 Router on page 24
All the router models s of the ACX5000 router supply quad small form-factor pluggable
plus (QSFP+) ports for use as uplinks or as access ports. These 40 GbE ports support
QSFP+ transceivers, QSFP+ direct-attach copper (DAC) cables, and DAC breakout cables
(DACBO). The ACX5048 has 6 QSFP+ ports; the ACX5096 has 8 QSFP+ ports that can
all be used as uplinks.
On all ACX5000 routers, the ports are enabled by default.
Downlink ports are product SKU-specific:
ACX5096—has 96 SFP+ ports that support SFP and SFP+ transceivers, as well as DAC
cables.
ACX5048—has 48 SFP+ ports that support SFP and SFP+ transceivers, as well as DAC
cables.
Figure 27 on page 60 shows the location of SFP+ and QSFP+ ports for the ACX5096,
Figure 28 on page 60 shows these ports for the ACX5048.
Chapter 7: Port and Interface Specifications
59