Device Control Block (Mks-8031Tb Trackball Module, Option) - Sony DVS-9000 System User Manual

Device Control Block (MKS-8031TB Trackball Module,
Option)
The device control block is used for three-
dimensional transform operations using a
DME, for wipe pattern position setting, and
5 MENU button
a Region selection buttons
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
[P/P] buttons are selected: This
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
When the MKS-9011 1M/E Control
Panel is used, only the [P/P] is enabled.
When the MKS-9012 2M/E Control
1 Region selection buttons
M/E1 M/E2 M/E3 P/P USER
DME1 DME2 DME3 DME4
RUN
DME5 DME6 DME7 DME8
CTRL
LOCAL GLB
SRC TRGT
MENU K1 K2
K3 K4
CB1 CB2
AXIS ASP LOC LOC ROT
LOC PERS SIZE XYZ POS
MAIN SUB ASP LOC RSZR
CLR
SHIFT X Y Z
WORK
BUFR
2 Operating buttons
for VTR/disk recorder or frame memory
clip operations.
3 Trackball
DEV
RSZR
CTRL
CTR
4 Z-ring
Panel is used, only the [M/E-1] and [P/
P] are enabled.
When the [USER] button is selected: This
enables pattern position setting used
for color backgrounds.
When the [DME 1] to [DME 8] buttons
are selected: This enables the three-
dimensional transform operation mode
in the device control block.
Press a button, turning it on, to select a
DME channel. You can select multiple
buttons simultaneously.
The number of valid buttons depends
Names and Functions of Parts of the Control Panel
69