Sony DVS-9000 System User Manual page 223

1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H (Horizontal modulation): Modulate the pattern, applying waviness in
the horizontal direction to edges.
V (Vertical modulation): Modulate the pattern, applying waviness in the
vertical direction to edges.
Fringe (Radial modulation): Modulate the pattern, applying waviness in
the radial direction to edges.
3
Set the following parameters.
.
Knob
1
2
3
4
Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
As the transition progresses, the edge of the pattern is subjected to barrel or
pincushion distortion.
A negative parameter value produces pincushion distortion, and a positive
value produces barrel distortion.
You can set the spring function independently for the main and sub patterns.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
Parameter Adjustment
Amplitude Amplitude of modulation
Frequency Frequency of modulation
Speed Speed of waves
Shape Form of the modulation
Spring off
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
1 to 3
Spring on
Basic Procedure for Wipe Settings
223