Magnitude
Through the course of the transition the wipe pattern rotates through the
specified angle.
The parameter Angle determines an angle of pattern inclination at the
beginning of the transition.
• A value of –100.00 corresponds to the angle rotated one whole turn
counterclockwise.
• A value of +100.00 corresponds to the angle rotated one whole turn
clockwise.
• With a value of 0.00 the pattern is stationary.
The parameter Magnitude determines an angle of pattern rotation through the
course of the transition.
• A value of –200.00 corresponds to a rotation of two turns counterclockwise.
• A value of +200.00 corresponds to a rotation of two turns clockwise.
• With a value of 0.00 the pattern is stationary.
You can apply rotation independently to the main pattern and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a fixed rate.
Magnitude: Rotate through a particular angle during the course of the
transition.
3
According to the selection in step 2, set the following parameters.
• When Angle is selected
Knob
Parameter
1
Angle
Adjustment
Angle of pattern rotation
Basic Procedure for Wipe Settings
Setting values
–100.00 to +100.00
217