When the MVE-8000A is used
Press [Border Color], turning it on, and set the following parameters.
Knob
1
2
3
When the BKDS-9470 or MVE-9000 is used
Use the buttons in the <Border Fill> group to select the signal to insert in the
border.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 475)
Ext Video: an external video signal input to the Ext IN connector
If Flat Color is selected, adjust the following parameters.
Knob
1
2
3
If Mix Color or Ext Video selected, the border color changes according to the
mix color signal or external video signal.
Softening the border edges
Press [Border Soft], turning it on, and set the following parameters.
Knob
1
Crop Settings
Cropping the image
1
In the DME menu, select VF1 'Edge' and HF1 'Border/Crop.'
The Border/Crop menu appears.
2
Press [Crop], turning it on.
The Crop effect is enabled. You can adjust degree of cropping with the
knobs.
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Parameter
Adjustment
Soft
Softness of inner side of border
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
DME Special Effect Operations
451