Sony DVS-9000 System User Manual page 541

Light shape
Creates the light shape.
• Select the shape pattern
For shape patterns, see "Shape Patterns" (page 805).
• Set the size, degree of deformation, softness, and rotation.
Ring settings
Shines the light with a hole in the middle, like a doughnut. Adjust the following
parameters.
Offset: Distance to move the center of the ring from the initial position (the
position set when selecting the light source in the <Spot Mode> group).
Radius: Inner side radius of the ring.
Angle: When an Offset is set, the rotation angle of the ring around the initial
center position.
Fill blending modes
Specifies the way in which the light is blended with the image.
Mix: Light as if reflected from a mirror. The light can be given a color.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
Relation between test spheres and parallel rays
The following figure shows an example of the effect of parallel rays on a test
sphere.
Initial center position
Angle
Offset
Angle: Rotation angle
Radius
DME Special Effect Operations
541