Sony DVS-9000 System User Manual page 536

Selecting the signal for the afterimage portion
In the <Wind Source> group, select the image to fill the afterimage portion.
Notes
• "Mix Color"or "Ext Video"can only be applied to one of the background (see
• When executing combining four channels of DME images, "Mix Color" and
Freeze Video: Freeze the input image to use as the afterimage.
Flat Color: Use a single color matte for the afterimage; you can set the
Hue Rotate: Use a single color matte with the hue changing for each frame as
Mix Color: Insert a mix color signal (see page 475) in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext IN connector in the
Rainbow: Use a freeze image with the hue changing every frame in the
Applying modulation to the afterimage portion (Modulation)
1
2
536
DME Special Effect Operations
page 552), flex shadow (see page 464), trail (see page 527), and wind effects.
If you select "Mix Color"or "Ext Video" in the wind settings, a selection of
"Mix Color"or "Ext Video" in any of the other effects is disabled, and "Flat
Color" is selected in its place.
"Ext Video" cannot be selected.
following parameters with the knobs.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
the afterimage; you can set the following parameters with the knobs.
Knob Parameter
1 Luminance
2 Saturation
3 Hue Speed
afterimage portion.
afterimage portion. The difference from "Hue Rotate" is that many colors
appear simultaneously.
For details of the Rainbow parameters, see the "Hue Rotate" item above.
In the Wind menu, press [Modulation], turning it on.
Set the following parameters.
Adjustment
Luminance
Saturation
Hue
Adjustment
Luminance
Saturation
Rate at which hue changes –12.00 to +12.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00