Sony DVS-9000 System User Manual page 518

The procedure for selecting the input signal in the <Back Video> group is the
same as for the Page Turn menu.
For details about operation, see "Page Turn settings" (page 516).
Sphere settings
You can set the degree of winding onto the sphere, the radius, the horizontal
position of the wound image, and front and back side output for the image.
Note
You cannot monitor the part of a rotating sphere that corresponds to its axis on
the monitor screen.
To apply the Sphere effect
Display the Sphere menu.
The knobs in the Sphere menu have the same functions as those in the Cylinder
menu.
For details about operation, see "Cylinder settings" (page 517).
Explosion settings
You can set the pattern shape and aspect ratio, the center position, the amount
of movement by fragments, the curvature of the transition path, and other
parameters.
To apply the Explosion effect
With the Explosion menu displayed, use the following procedure.
1
2
518
DME Special Effect Operations
In the <Mode> group, select the explosion pattern.
• Circle
• Rectangle
• Star
• Heart
• Ellipse
Set the following parameters.
• When Circle was selected in step 1
Knob Parameter Adjustment
1 Transition Degree of transition
2 Curve Degree to which image periphery
expands
Setting values
0.00 to 100.00
0.00 to 100.00