Sony DVS-9000 System User Manual page 172

Carrying out a color mix for the key edge fill matte
When you select 'Matte' for the edge fill of a border, drop border, or shadow,
you can create a combination of color 1 and color 2 using a wipe pattern
generated by the dedicated pattern generator.
1
2
3
172
Key Setting Operations Using Menus
Knob Parameter Adjustment
4 Bottom Key bottom edge position
Knob Parameter Adjustment
1 H Phase Key horizontal position
2 V Phase Key vertical position
Note
In the emboss function it is not possible to set [Fine Key] on.
• When the edge type is normal, drop border or shadow, enabling the [Fine
Key] function keeps [Key Drop] on.
• When applying a border to the key edge, enabling the [Fine Key]
function halves the border width setting range.
In the <Edge Fill> group of the Edge menu, select [Matte], then press
[Matte Adjust].
The edge fill Matte Adjust menu appears.
In the <Edge Matte> group, select [Mix Color], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Softness of pattern edge
3 Pattern Pattern number
a) The patterns are the same as standard wipes. (For details, see "Wipe Pattern List" in (page
363).)
To select the pattern, display the Mix Pattern Select menu by pressing
[Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the
Parameter group [1/2]
Parameter group [2/2]
Setting values
–2.00 to +2.00
Setting values
Left edge position
value shown
Top edge position
value shown
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24