Shrinking the graphics display
You can shrink the graphics display so that you can see beyond the range
displayed on the normal monitor screen. This makes it possible to visually set
the location of images in a larger space. The range displayed on a normal
monitor screen is indicated by a frame.
To automatically erase the graphic display
Turn Auto Erase on. The graphic display is erased automatically whenever a
keyframe is executed. It is displayed again after the keyframe ends, after the
time set in Recovery Time.
Flex Shadow center axis
When using the Flex Shadow function (see page 464), turn Flex Shadow Axis
on to display the Flex Shadow center axis. This is an effective aid in making
settings for this function.
Note
The Flex Shadow center axis function is not supported on the MVE-8000A.
422
DME
–4 –3 –2 –1 0 +1 +2 +3 +4
Range displayed
on normal monitor
screen
+3
+2
+1
0
–1
–2
–3
Grid (4:3 mode)
Wire frame