Sony DVS-9000 System User Manual page 632

a) This cannot be used on the MVE-8000A.
DME Global Effect menu
Item
Global Effect All
Combine
Shadow
Brick
Types of path
Path types for Curve
There are five types, as follows.
Path types for Hue
There are four types, as follows.
Path types for Xpt
There are two types, as follows.
632
Keyframes
OFF: Executing the effect causes no change.
Step: There is no interpolation between keyframes, so that the effect
parameters are updated each time a keyframe is passed.
Linear: Linear interpolation between keyframes, resulting in constant
speed movement.
S-Curve: The rate of change accelerates and decelerates before and
after a keyframe, so that the rate of change is maximum midway
between two keyframes.
Spline: The effect follows a smooth curved path from each keyframe to
the next.
CW: The hue changes in a clockwise direction as seen on a
Vectorscope.
CCW: The hue changes in a counterclockwise direction as seen on a
Vectorscope.
Short: The hue changes in whichever of the clockwise and
counterclockwise directions is shorter.
Long: The hue changes in whichever of the clockwise and
counterclockwise directions is longer.
Xpt Hold off: When replaying a keyframe, change the inputs to the
settings saved in memory.
Xpt Hold on: When replaying a keyframe, do not change the inputs.
Paths that can be set
Overall path settings for DME global effect
items are made simultaneously.
Path for combiner
Path for shadow
Path for brick