Sony DVS-9000 System User Manual page 466

Setting the center point of the flex shadow
1
2
466
DME Special Effect Operations
Knob Parameter Adjustment
1 Size H Enlarge or shrink horizontally
2 Size V Enlarge or shrink vertically
3 Size All Enlarge or shrink horizontally and
vertically
4 a) Softness of shadow
Soft
5 Density Density of shadow
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
In the Flex Drop Shadow menu, press [Axis Loc], turning it on.
Adjust the following parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter Adjustment
1 Axis Loc H Move the shadow center axis
horizontally
2 Axis Loc V Move the shadow center axis
vertically
• 16:9 mode
Knob Parameter Adjustment
1 Axis Loc H Move the shadow center axis
horizontally
2 Axis Loc V Move the shadow center axis
vertically
Setting values
0.00 to 2.00
0.00 to 2.00
Value of Size H
shown
0.00 to 100.00
0.00 to 100.00
Setting values
–8.00 to +8.00
–6.00 to +6.00
Setting values
–8.00 to +8.00
–4.50 to +4.50