Setting The Edit Points - Sony DVS-9000 System User Manual

Setting the Edit Points

To set the edit points, use any of the following operations in the keyframe
control block.
• To move the edit point to the keyframe immediately after the current time
• To move the edit point to the keyframe immediately before the current time,
• To move the edit point to a keyframe specified by number, press the [GO TO
• To move the edit point to a specified timecode, holding the [SHIFT] button,
644
Specifying the Region and Edit Points
EDIT ENBL button
STOP
EFF EDIT
NEXT
LOOP ENBL
KF
NORM
REV COPY
/REV
INS
RE
WIND
MENU
RUN
AXIS
LOC
SHIFT
SHIFT button
Editing buttons
(the position at which the effect is currently stopped), press the [NEXT KF]
button.
press the [PREV KF] button.
KF/TC] button turning its LED on, then enter the keyframe number with the
numeric keypad in the numeric keypad control block, and press the [ENTER]
button to confirm.
press the [GO TO KF/TC] button turning its LED on, then enter the timecode
value with the numeric keypad in the numeric keypad control block and press
the [ENTER] button to confirm.
CONST DUR button
KF EFF CONST KF
DELAY
DUR DUR DUR LOOP
FROM RUN
PASTE DEL UNDO
TO CTRL
GOTO PREV NEXT
MOD
KF/TC KF KF
LOCAL GLB SRC TRGT
ASP
LOC LOC
SKEW ROT
SIZE XYZ
PERS
CLR
WORK X Y Z CTR
BUFR
Edit point specification buttons
Keyframe control block
PAUSE