Sony DVS-9000 System User Manual page 214

6
7
Setting the wipe position (Positioner)
When you turn on this function, you can move the wipe pattern to any position.
• The parameter H Position controls the horizontal position of the pattern.
• The parameter V Position controls the vertical position of the pattern.
214
Basic Procedure for Wipe Settings
• When turning [Angle] on in the <Rotation> group and slanting the
pattern
Knob Parameter
1 Angle
a) See page 216.
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a constant rate
Knob Parameter
1 Speed
a) See page 216.
To adjust color 1, set [Color 1] on, and to adjust color 2 set [Color 2] on,
then adjust the parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
To interchange color 1 and color 2, press the [Color Invert] button, turning
it on.
Positioner off
A negative value moves the pattern to the left, and a positive value moves the
pattern to the right.
A negative value moves the pattern down, and a positive value moves the
pattern up.
Adjustment
Angle of pattern rotation
Adjustment
Rotation rate of pattern
Adjustment
Luminance
Saturation
Hue
Setting values
a)
–100.00 to +100.00
Setting values
a)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Positioner on