Sony DVS-9000 System User Manual page 736

Copying events
1
2
3
4
5
Inserting a pause event
1
2
3
4
736
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
To paste before the edit point, hold down the [SHIFT] button in the
keyframe control block and press the [PASTE] button.
This pastes the events from the paste buffer.
Specify the edit point for the start of the range to be copied.
To copy multiple events simultaneously, press the [FROM TO] button in
the keyframe control block, then specify the range in the numeric keypad
control block.
Press the [COPY] button.
This copies the specified events into the paste buffer.
Move to the edit point which is the destination within the macro to which
you want to copy the events.
To paste the contents of the paste buffer after the edit point, press the
[PASTE] button in the keyframe control block.
To paste before the edit point, hold down the [SHIFT] button in the
keyframe control block and press the [PASTE] button.
This copies the events from the paste buffer.
Press the [PAUSE] button in the keyframe control block, lighting it green.
The indication "PAUSE" appears in the numeric keypad control block
display.
If required, press the [AUTO INS] button assigned to a utility/shotbox
control block or user preference button, to toggle the auto insert mode on
or off.
Enter the pause duration with the numeric keypad control block (0 or 1 to
999 (frames)).
Press the [ENTER] button.
• If auto insert mode is on, this sets the pause duration, and inserts the
pause event.
• When auto insert mode is off, continue to step 5.