Sony DVS-9000 System User Manual page 906

Setting the source table
1
2
3
4
5
To set the shift operation of the source selection buttons
To set the operation mode of the rightmost button in the source selection button
row with different destinations assigned to the 1st and 2nd rows, select the
source table in the Source Table Assign menu, then in the <Xpt Shift Mode>
group select one of the following.
Hold: Acts as a shift button, and the shifted source selection buttons are
Lock: Acts as a shift button, and pressing the button toggles between the
Off: Acts as a cross-point button, that is, button number 16 on a 16-button
906
Auxiliary Bus Control Block Settings (Aux Assign Menu)
In the Panel >Aux Assign >RTR Mode Setting menu, press [Source Table
Assign].
The Source Table Assign menu appears.
In the <Source Table Select> group, select the source table you want to
manipulate.
Press [Table Assign].
The Table Assign menu appears.
The left of the status area lists the button numbers and set sources, and the
right side lists the source that can be assigned.
Using any of the following methods, select a source selection button and
the source you want to assign.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Source No Source selection button selection
2 No Source selection in S-Bus space
• For a button whose operation you want to disable, press [Inhibit].
Press [Source Set] to confirm the selection.
enabled while the button is held down.
shifted and unshifted states of the source selection buttons.
system, button number 24 on a 24-button system, and button number 32 on
a 32-button system.
Setting values
1 to 128
1 to 1024