Sony DVS-9000 System User Manual page 319

Target bank
M/E-1
PGM/PST
Note
If a DME is being used on the source keyer for a copy or either keyer for a
swap, then if for example there are insufficient DME channels, or the limit on
using DME channels within an M/E bank is exceeded, it may not be possible
to select the DME.
Wipe copy and wipe swap
You can copy and swap the wipe settings between the banks.
Target bank
M/E-1
PGM/PST
Wipe copy and wipe swap in the independent key transition
control block
You can copy and swap the wipe settings among the keyers listed in the
following table.
Target bank
M/E-1
PGM/PST
DME wipe copy and DME wipe swap
You can copy and swap the DME wipe settings between the banks listed in the
following table.
Target bank
M/E-1
PGM/PST
Target keyer
Keys 1 to 4
Downstream keys 1 to 4
Target data
Wipe settings.
It is not, however, possible to carry out copy or swap involving
independent key transition wipe settings.
Target keyer
Keys 1 to 4
Downstream keys 1 to 4
Target data
DME wipe settings.
It is not, however, possible to carry out copy or swap involving
independent key transition DME wipe settings.
Target data
Key settings excluding the following data
items:
• Setup data
• Key snapshots
• Key memory
Target data
Wipe settings in the independent key
transition control block.
319
Copy and Swap