Defocusing the afterimage portion (Defocus)
Note
The function to defocus the trail afterimage portion is not supported on the
MVE-8000A.
1
2
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
2
Setting a combine process
Select whether to add the Trail effect before or after the combine.
Notes
• The combine process function is not supported on the MVE-8000A.
• When you change the selection in the <Combine Process> group, the
• When you do not combine images, the Trail effect only is applied, regardless
530
DME Special Effect Operations
Press [Defocus], turning it on.
Set the following parameters.
Knob
Parameter
1
Defocus V
2
Defocus K
Press the [DUST] button, turning it on.
Set the following parameters.
Knob
Parameter
1
Trail Dust
2
Dust Soft
3
Dust Size
4
Dust Aspect
a) The way in which the afterimage disappears is affected by both Decay and Trail Dust
parameter adjustments.
afterimages which had been added up to then disappear.
of the selection in the <Combine Process> group.
Adjustment
Defocusing of the video
signal
Defocusing of the key
signal
Adjustment
Amount of the afterimage
a)
disappearing as stardust
Timing with which stardust
disappears
Size of stardust
Aspect ratio of stardust
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00