Sony DVS-9000 System User Manual page 559

Hide thumbs Also See for DVS-9000 System:

Table of Contents

In the <Key Field/Frame Mode> group, select the interpolation method for

the key signal.

Adaptive: Detect changes in the luminance component of the key signal

separately, and switch automatically between fields and frames.

Field: Do interpolation in field units. This gives natural movement,

suitable for moving video.

Frame: Do interpolation in frame units. This gives higher image precision,

suitable for still pictures.

When you select Adaptive in step 4, set the following parameter.

In the <Interpolation Mode> group, set the number of pixels to use in

interpolation.

Multi: Use multi-point interpolation. This gives higher picture quality.

Linear: Use two-point interpolation.

When using the BKDS-9470, Multi is always selected.

In the <Filter Mode> group, select the method used to show the picture

reduced or expanded.

Mode1 (standard): Even when the picture is reduced, add compensation

so that it can be seen clearly.

Mode2 (soft): Suppress aliasing when expanding or reducing the picture.

Mode3 (sharp): Do not surpress aliasing when expanding or reducing the

Degree of motion detection

Degree of motion detection

Setting values

Setting values

DME Special Effect Operations

Dvs-9000sf system