Setting An Illegal Color Limit For Matte Signals; Making Dme System Phase Adjustment; Setting The Tbc Window Center Position - Sony DVS-9000 System User Manual

• If you selected 16:9 in step 1
Knob
1
2
3
4
To return the parameter values to their default values
Press [Unity] in the <Crop> group.

Setting an Illegal Color Limit for Matte Signals

To enable the illegal color limiter for the signals generated by the DME internal
matte generator, press [Matte Illeg Col Limit] for DME1 in the DME >Input
menu, turning it on.

Making DME System Phase Adjustment

To adjust the DME reference phase, use the following procedure.
1
In the DME >Input menu, press [System Phase].
2
Set the following parameters.
Knob
1
2

Setting the TBC Window Center Position

When the MVE-8000A/MVE-9000 is connected through SDI interface, the
DME >Input >TBC Center menu allows you to set the TBC window center
position.
Parameter Adjustment
Top Position of top side
Left Position of left side
Right Position of right side
Bottom Position of bottom side
Parameter Adjustment
DME1 DME1 system phase adjustment
Phase
DME2 DME2 system phase adjustment
Phase
Setting values
–32.00 to +96.00
–32.00 to +96.00
Settings Relating to Signal Inputs (Input Menu)
Setting values
–9.00 to +9.00
–16.00 to
+16.00
–16.00 to
+16.00
–9.00 to +9.00
981