Recalling A Macro Register And Executing A Macro - Sony DVS-9000 System User Manual

Recalling a Macro Register and Executing a Macro

To carry out a macro operation, recall a macro register. Recalling an empty
register allows you to carry out macro editing operations. Recalling a register
holding a macro executes the macro immediately.
To recall a macro register, use the following procedure.
1
2
730
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
EDIT ENBL button
STOP
EFF EDIT KF
NEXT
LOOP ENBL DUR
KF
NORM
REV COPY PASTE
/REV
INS MOD
RE
WIND
MENU LOCAL
RUN
ASP
AXIS
SKEW
LOC
PERS
CLR
SHIFT
WORK
BUFR
Editing buttons
In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations, and
the [RCALL] button lights.
Enter the number of the register to be recalled with the numeric keypad
buttons.
To search for an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the corresponding register number. A letter "E" after
the number indicates that the corresponding register is empty.
PAUSE button
EFF CONST KF
DELAY PAUSE
DUR DUR LOOP
FROM RUN
DEL UNDO
TO CTRL
GOTO PREV NEXT
KF/TC KF KF
GLB SRC TRGT
LOC LOC
ROT
SIZE XYZ
X Y Z CTR
Edit point specification buttons