Sony DVS-9000 System User Manual page 510

Split settings
You can set the degree to which the image is split, the split positions, and other
parameters.
To apply the Split effect
With the Split menu displayed, use the following procedure.
1
2
To set the split position
1
2
Split Slide settings
You can set the degree of transition, the degree of randomness in the distance
moved by each block, the degree of sliding, block width, block angle, and other
parameters.
To apply the Split Slide effect
With the Split Slide menu displayed, set the following parameters.
510
DME Special Effect Operations
Knob Parameter Adjustment
2 V Vertical center position
In the <Mode> group, select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
Set the following parameters.
Knob Parameter Adjustment
1 Transition H Degree of left and right separation
2 Transition V Degree of top and bottom
separation
Press [Position].
Set the following parameters.
Knob Parameter Adjustment
1 H Degree of left and right
separation
2 V Degree of top and bottom
separation
Setting values
–6.000 to +6.000
Setting values
0.000 to 100.000
0.000 to 100.000
Setting values
–4.000 to +4.000
–3.000 to +3.000