Sony DVS-9000 System User Manual page 473

a) –1.00 represents a whole turn counterclockwise, and +1.00 represents a whole turn
clockwise. 0.00 is the original state.
• When Speed is selected
Knob
1
a) –100.00 represents a speed of four whole turns counterclockwise per second, and +100.00
represents a speed of four whole turns clockwise per second. 0.00 is the stationary state.
Applying modulation to the wipe crop pattern (Modulation)
1
In the <Modulation> group of the Wipe Crop menu, select one of the
following.
H (horizontal modulation): Modulate the pattern to apply waving in the
horizontal direction.
V (vertical modulation): Modulate the pattern to apply waving in the
vertical direction.
2
Set the following parameters.
Knob
1
2
3
Replicating the wipe crop pattern (Multiplication)
1
In the Wipe Crop menu, press [Multi], turning it on.
2
Set the following parameters.
Knob
1
2
3
a) See the following figure
Parameter Adjustment
Speed Rotation rate of pattern
Parameter Adjustment
Amplitude Amplitude of modulation
Frequency Frequency of modulation
Speed Speed of waves
Parameter Adjustment
H Multi Number of repetitions of
pattern horizontally
V Multi Number of repetitions of
pattern vertically
Invert Type Replication layout
Setting values
a)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
Setting values
1 to 63
1 to 63
a)
1 to 4
DME Special Effect Operations
473