Selecting The Module To Be The Reference For Device Control Block; Assigning A Region To A Region Selection Button In The Numeric Keypad Control Block - Sony DVS-9000 System User Manual

Selecting the Module to be the Reference for Device
Control Block
In the <Reference Module> group of the Panel >Config menu, select the
module to be the reference.
• Trackball
• Joystick
Assigning a Region to a Region Selection Button in the
Numeric Keypad Control Block
A maximum of four regions can be set for a single region selection button in
the numeric keypad control block.
1
880
Overall Control Panel Settings (Config Menu)
The [KEY1], [KEY2], [KEY3], and [KEY4] next transition selection
buttons in the transition control block are now selected coupled to the
settings in the Key Trans Link menu for transition links between keyers.
Note
These settings apply to the whole Key Trans Link menu. It is not possible
to make separate settings for each master keyer.
In the Panel >Config menu, press [10 Key Region Assign].
The 10 Key Region Assign menu appears.