Sony DVS-9000 System User Manual page 210

Splitting the wipe pattern (Split)
This splits the pattern, making the parts of the wipe move in opposite
directions.
The parameter Split No specifies the number of splits.
The parameter Spacing specifies the spacing between adjacent patterns.
1
2
3
Modifying the wipe pattern edge (Edge)
You can apply a border to the pattern, soften the edges, or soften the applied
border.
Border: You can adjust the border width.
210
Basic Procedure for Wipe Settings
Split off
In the M/E-1 >Wipe menu, select HF4 'Edge/Direction.'
The Edge/Direction menu appears.
Press [Split], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Split No Number of splits
2 Spacing Spacing between adjacent
patterns
Border
Split on
Setting values
1 to 4 (integer)
0.00 to 100.00
Soft
Soft border