Setting The Mode Of Buttons And Trackball In The Device Control Block; Setting The Effect Timeline Mode - Sony XVS-G1 User Manual

Setting the Mode of Buttons and
Trackball in the Device Control Block
Setting the trackball sensitivity
You can set the sensitivity (degree of movement of an
image) for when the trackball/Z-ring is operated.
Note
Disabled in the following operation modes.
• Device/frame memory/clip player operation mode
• Run control operation mode
To set the sensitivity in normal mode
1
Open the Home > Setup > Panel > Custom >
Sensitivity menu (19104.65).
2
In the [Trackball Normal Mode] group, select a
sensitivity.
×1: Move at 1× speed.
×2: Move at 2× speed.
×4: Move at 4× speed.
To set the sensitivity in fine mode
1
Open the Home > Setup > Panel > Custom >
Sensitivity menu (19104.65).
2
In the [Trackball Fine Mode] group, select a
sensitivity.
1/2: Move 1/2 the distance of 1× speed of normal
mode.
1/4: Move 1/4 the distance of 1× speed of normal
mode.
1/8: Move 1/8 the distance of 1× speed of normal
mode.
Setting the sensitivity for button double-
press
You can set the sensitivity when recalling a menu using
button double-press.
1
Open the Home > Setup > Panel > Custom >
Sensitivity menu (19104.65).
2
In the [Double Click] group, select a sensitivity.
Fast: Fast double-press
Normal: Normal double-press
Slow: Slow double-press

Setting the Effect Timeline Mode

Inserting the first keyframe automatically
when an empty register is recalled
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
Press the [1st KF Auto Insert] button.
On: Insert the first keyframe automatically.
Off: Do not insert the first keyframe automatically.
Setting the default keyframe duration
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
Press the [Default KF Duration] button and enter the
default keyframe duration in the numeric keypad
window.
Saving an effect timeline automatically
You can save an edited effect timeline automatically when
a different register is recalled while editing the effect
timeline.
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
Press the [Effect TL Auto Save] button.
On: Save an edited effect timeline automatically.
Off: Do not save an edited effect timeline
automatically.
Exiting edit mode automatically when a
register is recalled during editing
You can exit edit mode and switch to recall/store mode
when a register is recalled while in effect timeline edit
mode.
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
Press the [Edit Enable Auto Off] button.
On: Switch to effect timeline recall/store mode.
Off: Continue in effect timeline edit mode.
327