Interpolation Settings - Sony DVS-9000 System User Manual

Interpolation Settings

Specifies the methods used for interpolation processing of input video signals
and input key signals.
For input video signals, you can select from the following four methods.
• Detect changes in the luminance and chrominance signals separately, and
• Detect changes in the luminance signal separately, and switch automatically
• Do interpolation in field units.
• Do interpolation in frame units.
For input key signals, you can select from the following three methods.
• Detect changes in the luminance signal separately, and switch automatically
• Do interpolation in field units.
• Do interpolation in frame units.
You can also select the number of pixels used in interpolation processing, and
select the method used to show the picture reduced or expanded.
Selecting an interpolation method for input video signals
1
2
3
558
DME Special Effect Operations
switch automatically between fields and frames. You can select the degree of
change detection.
between fields and frames. You can select the degree of change detection.
between fields and frames. You can select the degree of change detection.
In the DME menu, select VF6 'Input/Output' and HF3 'Process.'
In the <Video Field/Frame Mode> group, select the interpolation method
for the video signal.
Adaptive Y/C: Detect changes in the luminance and chrominance
components of the video signal separately, and switch automatically
between fields and frames.
Adaptive Y: Detect changes in the luminance component of the video
signal separately, and switch automatically between fields and frames.
Field: Do interpolation in field units. This gives natural movement,
suitable for moving video.
Frame: Do interpolation in frame units. This gives higher image precision,
suitable for still pictures.
When you select Adaptive Y/C or Adaptive Y in step 2, set the following
parameter.