Saving Files Recalled By Autoload - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Saving Files Recalled by Autoload

If you save effect setting data, frame memory image files and so on in the

PWON_LD directory on the hard disk, then when the system is powered on this

data is recalled automatically. This is known as the autoload function.

To save the data to be recalled by the autoload function, use the menu for

operations on individual files.

For the data recalled by the autoload function, see "Saving data recalled by

autoload" (page 779).

For the setting enabling or disabling the autoload function, see "Setting

Automatic Loading of Register Data at Power On (Autoload Function)" in

Chapter 18 (Volume 3).

For example, to save snapshot data, use the following procedure.

In the File menu, select VF3 'Snapshot' and HF1 'Snapshot.'

The Snapshot menu appears.

In the device selection area on the left, select [Register].

In the device selection area on the right, select [HDD].

Be sure to select [HDD] as the saving destination.

Select the PWON_LD directory.

The PWON_LD directory is automatically created when [Power On File

Load] is set to On in the System >Start Up menu. If set to Off, the directory

does not appear.

Using any of the following methods, select the data to be saved, and the

file in which to save it.

• To select all files within the list, press [ALL] below the list.

• To select multiple files, turn the knobs to select in the following ranges.

Select the first register whose data

is to be saved

Select the first file to which data is to

Number of registers to be selected

Setting values

Saving Files Recalled by Autoload

Dvs-9000sf system