Sony DVS-9000 System User Manual page 502

Knob
1
2
3
4
5
Knob
1
3
5
a) Set when Lock is on.
b) Set when Lock is off.
To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
Knob
1
2
a) 1 (SINE): Sine wave
Ripple settings
There are four modes: Radial, Angular, Both, and Shape. The direction of
modulation differs depending on the mode. You can set the size and frequency
of the ripples, their direction and speed, their center point, and other
parameters. In Shape mode, you can select ripple shapes other than circles
(stars, etc.).
502
DME Special Effect Operations
Parameter Adjustment
Amp V Amplitude of twist in vertical direction 0.00 to 100.00
Freq V Frequency of twist in vertical direction 0.00 to 100.00
a) Amount of movement in twist phase
Offset V
in the vertical direction
b) Speed and direction of twist
Speed V
movement in vertical direction
Slant Slant of twist
Parameter Adjustment
Amp H Amplitude of twist in horizontal
direction
a) Amount of movement in twist phase
Offset H
in the horizontal direction
Slant Slant of twist
Parameter Adjustment
Form H Waveform in horizontal direction
Form V Waveform in vertical direction
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
Parameter group [1/2]
Parameter group [2/2]
Setting values
–16.00 to +16.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
0.00 to 100.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
a)
1 to 6
a)
1 to 6