Sony DVS-9000 System User Manual page 785

Hide thumbs Also See for DVS-9000 System:

Table of Contents

In the device selection area on the right, select where the file is held

([HDD] or [Memory Card]), and then specify a directory.

See "Selecting a Device for Operations" (page 782).

Using any of the following methods, select the register to which you want

to load, and the file to be loaded.

• To select all files within the list, press [ALL] below the list.

• To select multiple files, turn the knobs to select in the following ranges.

Knob Parameter

• To select a single file, press the arrow keys to scroll the reverse video

cursor, or press directly on the list in the status area.

Press [T Load].

This loads the contents of the selected file from the specified location.

(Setup data is first loaded.)

Loading frame memory files

Between steps 3 and 4 of the procedure above, "Loading Files," do as follows.

To select the frame memory folder, press [Default] in the device selection

in the list on the left.

A pull-down menu appears.

Press the required folder name.

Carry out the same operations as in steps 1 and 2 on the list on the right.

Select the type of data to be displayed.

• To display still image files, press [Still].

• To display clip files, press [Clip].

Select the first register into which the data

is to be loaded

Select the first file in which data is held

Number to be selected

Setting values

Operations on Individual Files

Dvs-9000sf system