Sony DVS-9000 System User Manual page 353

Knob
3
4
7
Press [Window], turning it on, to adjust the key detection range for spot
color adjustment.
Knob
1
2
3
8
In the <Spot CCR> group, press [Spot CCR] to display the parameters, and
adjust the replacement color.
.
Knob
1
2
3
To return the parameters to their default settings
In the <Spot CCR> group, press [Unity].
Masking a part of the spot color adjustment
In the <Spot CCR Mask> group, press [Mask1] or [Mask2], turning it on, then
carry out the same procedure as in "Masking a part of the primary color
correction" (page 344).
Adjusting the color outside the spot color adjustment region
1
In the Spot CCR/Output menu, press [Outer Out Proc] in the <Outer Out
Proc> group, turning it on.
2
Adjust the following parameters.
Knob
1
2
3
4
Parameter Adjustment
Hue Hue
Gain Key gain
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Video Gain Video signal gain
Y Gain Y signal gain
C Gain Chrominance signal gain
Hue Delay Hue delay
Setting values
359.99 to 0.00
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
Color Corrector Functions
353