Sony DVS-9000 System User Manual page 513

2
Set the following parameters.
Knob
1
2
Kaleidoscope settings
You can set the number of blocks, the partition reference point and angle,
horizontal and vertical offsets, a reflection position, and other parameters.
To apply the Kaleidoscope effect
With the Kaleidoscope menu displayed, set the following parameters.
Knob
1
2
3
4
To reflect the kaleidoscope image as if in a mirror
1
To reflect in the horizontal direction, press [Mirror H], turning it on.
2
To reflect in the vertical direction, press [Mirror V], turning it on.
To set the reflection position
1
Press [Position], turning it on.
2
Set the following parameters.
Knob
1
2
To cyclically repeat part of the original and its reflection
Press [Cyclic], turning it on.
Lens settings
You can set the shape and aspect ratio of the lens, the angle, the magnification
ratio, the curve ratio, the size, the center position, and other parameters.
Parameter Adjustment
H Horizontal original image center
position
V Vertical original image center
position
Parameter Adjustment
Number Number of blocks
Phase Angle of partition reference point
Offset H Amount of horizontal offset
Offset V Amount of vertical offset
Parameter Adjustment
H Horizontal reflection position
V Vertical reflection position
Setting values
–4.000 to +4.000
–4.000 to +4.000
Setting values
0.00 to 100.00
–8.000 to +8.000
–4.000 to +4.000
–3.000 to +3.000
Setting values
0.000 to 4.000
0.000 to 3.000
DME Special Effect Operations
513