Recalling A Register - Sony DVS-9000 System User Manual

Recalling a Register

Use the numeric keypad control block to recall a register. For each region there
are 99 registers dedicated to keyframes, numbered from 1 to 99.
When creating an effect as a user programmable DME, use a 3-digit register
number which is commonly used for all DME regions (channels).
For a description of the concept of regions and registers, see "Regions" (page
617) and "Registers" (page 619).
Recalling a register from the numeric keypad control block
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to keyframe operations,
and the [RCALL] button lights.
2
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
Display
EFF button
SNAP
EFF
SHOT
SHOT
MASTR ALL
MCRO
BOX
M/E USER USER
TRANS
P/P
1 1 2
RATE
DME DME DME DME
1 2 3 4
P-BUS GP1
M/E
P/P
1
AUX AUX AUX AUX AUX
1 2 3 4 5
Region selection buttons
Numeric keypad control block
UNDO button
+/-
8 9 EFF
7
DISS
UNDO
CLR
4 5 6 AUTO
TRANS
STORE
STATS
TRIM
1 2 3
GPI
STORE ENBL
0
ENTER
RCALL
AUX AUX FMS FMS EDIT
KEY
6 7 1 2 PVW
Numeric keypad
RCALL button
SHIFT
639
Recalling a Register